Villa with indoor pool
Home automationLightingPool
Facade and indoor pool lighting by scenes, coordinated with climate and the plant room. A real, finished installation.
What it is
Centralised control of what you already have — and what you are about to install.
Home automation is not a separate gadget: it is the layer that lets climate, energy, water and security talk to each other. We work with Loxone, KNX and related systems.
Climate and heating
Air conditioning, underfloor heating, radiators and ventilation by zone, with schedules and scenes.
Lighting
On/off, dimming and scenes (dinner, reading, night) from your phone or the switch.
Blinds and awnings
Automatic opening by sun, wind or presence — without going room by room.
Access and security
Doors, gates, video entry, open sensors, cameras and alarm on the same panel.
Pool
Temperature, filtration and water level controlled remotely, coordinated with the rest.
Irrigation and energy
Zoned irrigation, real-time consumption and priorities between grid, panels and batteries.
Leak detection
Sensors that shut off the water themselves and alert your phone before damage spreads.
Comfort and audio
Multi-room audio, EV charger, weather station and automations driven by outdoor conditions.
Who it is for
For anyone who wants a home (or a development) that manages itself.
Villas and single-family homes
Where remote comfort and scenes are part of how the house is lived in.
Full renovations
The moment to cable it properly: leave it for later and the cost jumps.
Complexes and developments
Commercial differentiation and less aftercare: the home acts before damage is done.
Anyone with disconnected systems
One brand for climate, another for lights, a third for the alarm — and none of them talk.
What problem it solves
The mess of remotes, apps and providers nobody wants to inherit.
01
One remote per system
Every installation brings its own app and logic. Home automation unifies them: one panel, one logic, one point of contact.
02
Issues that arrive too late
A leak, an open door or runaway climate is noticed when the damage is already done. The system cuts and alerts in seconds.
03
Nobody else can configure it
If only the original installer understands the cabinet, every change is a problem. We leave a documented, maintainable system.
Selected work
What can be controlled — and how it looks at home.
First, real finished installations; then examples of the kind of system we build (lighting, climate, blinds, access, pool).
Wall control panels
Home automationLoxone
Loxone touch panels and integrated climate controls: climate, lighting, access and music from one place.
Architectural lighting
Home automationLighting
Linear profiles, backlit staircase and per-room scenes, all from the same system.
Lighting and scenes
Home automationLighting
Scenes (dinner, reading, night) from a panel or phone. One logic for the whole house, not a different switch in every room.
Zoned climate control
Home automationClimate control
Temperature by room, schedules and modes. The thermostat stops being a standalone remote: it talks to the rest of the system.
Blinds and curtains
Home automation
Opening by sun, presence or scene. In villas with large glazing, automatic control prevents overheating.
Access and security
Home automationSecurity
Lock, gate or video entry in the same system. Phone alerts and remote opening without a separate app.
Connected pool
Home automationPool
Filtration, temperature and schedules from the same panel as the climate. Coordinated with the plant room, not a standalone unit.
Villa with full control
Home automationLoxoneKNX
Lighting, climate, blinds, access and irrigation as one system. The result shows up in daily comfort, not in a cupboard of gadgets.
2026
DHW plant room with smart control
PlumbingHome automation
Full plant-room renovation: insulated pipework, water softener and pumps; electrical panel with smart devices to control the water heater and the hot-water circulation pump.
Control and KNX
Home automation
Control panel and KNX integration for fan coils and zoned climate control.
Control and network cabinets
Home automationLoxoneKNX
Tidy, labelled and documented cabinets, with network rack and CCTV. What you never see, but what makes everything work.
Frequently asked questions
Mainly Loxone and KNX. We choose by project: budget, typology and which systems need integrating (climate, energy, access).
Both. In new build we cable with headroom. In renovation we reuse what is there and prioritise the highest-impact pieces (climate, lighting, security, leaks).
Not necessarily. It can integrate what you already have or build access and detection from scratch. What matters is managing everything from one system.
We do. Same team that installs climate, water and energy: an issue does not turn into a round of calls to three providers.
With the property type, the scope (lighting, climate, security, pool…) and drawings or a specification if you have them. We tell you what fits and in what order.